Graco Reactor 3 E-20 – electric PU foam machine
- About the product
- Description
- Technical specifications
Graco Reactor 3 E-20 – electric PU foam machine
Graco Reactor 3 E-20 is the smallest electric machine of the new Reactor 3 generation for spraying open- and closed-cell polyurethane (PU) foam. Quiet, compact and easy to operate via the touchscreen.
Typical jobs: small and medium jobs – family houses, flats, attics, smaller commercial buildings.
Key features
- 1.8 HP brushless motor, output up to 7.6 l/min (2 gal/min), pressure up to 138 bar
- Primary heater 7 kW or 10 kW, independent heating of A and B hoses
- Heated hoses up to 67 m
- Runs on a smaller generator (16–19 kW for the machine alone)
- Active ISO pump lubrication with a peristaltic pump, filters with 2× larger area
Standard, Pro or Elite?
- Standard – touchscreen display (ADM), independent heating of A and B hoses, data download via USB.
- Pro – everything in Standard + more powerful heaters, large inlet filters, Reactor Connect (monitoring and control by phone), automatic pressure balancing and heater power management.
- Elite – everything in Pro + Katalyst control of the whole system from drum to gun, mix ratio monitoring (Ratio Assurance), inlet pressure and temperature sensors. With Core E1 pumps it automatically shuts off the supply when material runs out.
Standard and Pro can later be upgraded to Elite level.
Machine and package part numbers
The whip is a short flexible hose between the heated hose and the gun. The gun is ordered separately.
| Part no. | Contents |
|---|---|
| Standard | |
| 26R310 | E-20 Standard machine, 7 kW heater |
| ESR310 | package: 15 m externally heated hose + 3 m whip hose |
| EHR310 | package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose |
| ISR310 | package: 15 m internally heated hose + 6 m whip hose |
| IHR310 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose |
| Pro | |
| 26R311 | E-20 Pro machine, 7 kW heater |
| ESR311 | package: 15 m externally heated hose + 3 m whip hose |
| EHR311 | package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose |
| ISR311 | package: 15 m internally heated hose + 6 m whip hose |
| IHR311 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose |
| 26R313 | E-20 Pro machine, 10 kW heater |
| ESR313 | package: 15 m externally heated hose + 3 m whip hose |
| EHR313 | package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose |
| ISR313 | package: 15 m internally heated hose + 6 m whip hose |
| IHR313 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose |
| Elite | |
| 26R312 | E-20 Elite machine, 10 kW heater |
| ESR312 | package: 15 m externally heated hose + 6 m whip hose, engine connection cable for the generator |
| EHR312 | package: 4 × 15 m (60 m) externally heated hose + 6 m whip hose, engine connection cable for the generator |
| ISR312 | package: 15 m internally heated hose + 6 m whip hose, engine connection cable for the generator |
| IHR312 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose, engine connection cable for the generator |
| CSR312 | complete Elite package: 15 m internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator |
| CHR312 | complete Elite package: 2 × 30 m (60 m) internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator |
Power supply, generator and compressor
Total system power: 12.9 kW (7 kW version) or 15 kW (10 kW version). Full-load current: 7 kW version: 56 A at 230 V (single-phase) or 24 A at 400 V (three-phase); 10 kW version: 65 A at 230 V or 24 A at 400 V.
Generator: Graco’s rule is (sum of the power of all consumers) × 1.25 = required generator power in kW. For this Reactor alone that is at least 16–19 kW; with a compressor and other equipment on the same generator we recommend a three-phase (400 V) generator of 25–30 kW. The Power Management function (Pro and Elite) can limit the heater and reduce the generator size needed.
Compressor: the Fusion AP/PC gun needs 5.6–9 bar and uses 20–200 l/min of air for purging, depending on the mix chamber. With Core E1 electric pumps a compressor of about 400–600 l/min is sufficient (for the gun, dryer and breathing air). With T4 pneumatic pumps add 85–310 l/min per pump, so a compressor of about 700–800 l/min is needed. Graco recommends a compressor that runs continuously (load/unload) rather than one that constantly starts and stops, together with an air dryer.
Detailed guide with flow charts and recommendations by job size: Waterproofing and thermal insulation with modern materials – guide (in Serbian).
Gun and transfer pumps – chosen with the machine
The gun is chosen separately, according to the job: Fusion AP (air-purge gun), Fusion PC (ProConnect cartridge – rebuilt in seconds) or Fusion FX (the lightest in the Fusion series).
For feeding material from the drum, choose transfer pumps: Core E1 (electric, quiet, no air consumption – with the Elite version they activate Katalyst) or T4 (pneumatic, 3:1).
Guns, pumps, heated hoses and spare parts are in the section Equipment and parts for thermal insulation machines:
Available versions (Graco Part No.)
- 26R313 – Pro Tier, 10 kW
- 26R312 – Elite Tier, 10 kW
Please quote the part number of the version you need.
| Feature | Specification |
|---|---|
| Manufacturer | Graco (USA) |
| Model | Reactor 3 E-20 (Standard / Pro / Elite) |
| Drive | electric, brushless motor 1.8 HP |
| Purpose | PU foam (open and closed cell) |
| Max. flow | 7.6 l/min (2 gal/min) |
| Max. working pressure | 138 bar (2000 psi) |
| Primary heater | 7 kW (Standard/Pro) or 10 kW (Pro/Elite) |
| Max. heated hose length | 67 m |
| Power supply | 230 V (single-phase) or 400 V (three-phase), 50/60 Hz |
| Total system power | 12.9 kW (7 kW) / 15 kW (10 kW) |
| Weight | about 118 kg |
CONTACT US
Have a question or need more information? Contact us – our team is here to help.
SALES
RELATED PRODUCTS
-
Category: Thermal insulation machines
Graco Reactor 3 E-20 – electric PU foam machine
-
Category: Thermal insulation machines
Graco Reactor 3 E-30 – electric PU foam machine
-
Graco Reactor 3 E-XP2 Elite – CHR342 package
-
Category: Thermal insulation machines
Graco Reactor 3 H-30 – hydraulic PU foam machine




