Category: ,

Graco Reactor 3 E-XP1 – electric polyurea machine

Graco Reactor 3 E-XP1 električna mašina za poliureu
  • About the product
  • Description
  • Technical specifications

Graco Reactor 3 E-XP1 – electric polyurea machine

Graco Reactor 3 E-XP1 is an electric machine for hot spraying of polyurea and plural-component coatings. The smallest Reactor 3 model for polyurea.

Typical jobs: small and medium jobs – terraces, balconies, pools, smaller flat roofs, repairs and protective coatings.

Key features

  • 1.8 HP brushless motor, output up to 5.7 l/min (1.5 gal/min)
  • Pressure up to 207 bar – sufficient for pure and hybrid polyurea
  • 10 kW heater, independent heating of A and B hoses
  • Heated hoses up to 67 m
  • Active ISO pump lubrication, filters with 2× larger area

Standard, Pro or Elite?

  • Standard – touchscreen display (ADM), independent heating of A and B hoses, data download via USB.
  • Pro – everything in Standard + more powerful heaters, large inlet filters, Reactor Connect (monitoring and control by phone), automatic pressure balancing and heater power management.
  • Elite – everything in Pro + Katalyst control of the whole system from drum to gun, mix ratio monitoring (Ratio Assurance), inlet pressure and temperature sensors. With Core E1 pumps it automatically shuts off the supply when material runs out.

Standard and Pro can later be upgraded to Elite level.

Machine and package part numbers

The whip is a short flexible hose between the heated hose and the gun. The gun is ordered separately.

Part no. Contents
Standard
26R320 E-XP1 Standard machine, 10 kW heater
ESR320 package: 15 m externally heated hose + 3 m whip hose
EHR320 package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose
ISR320 package: 15 m internally heated hose + 6 m whip hose
IHR320 package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose
Pro
26R321 E-XP1 Pro machine, 10 kW heater
ESR321 package: 15 m externally heated hose + 3 m whip hose
EHR321 package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose
ISR321 package: 15 m internally heated hose + 6 m whip hose
IHR321 package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose
Elite
26R322 E-XP1 Elite machine, 10 kW heater
ESR322 package: 15 m externally heated hose + 6 m whip hose, engine connection cable for the generator
EHR322 package: 4 × 15 m (60 m) externally heated hose + 6 m whip hose, engine connection cable for the generator
ISR322 package: 15 m internally heated hose + 6 m whip hose, engine connection cable for the generator
IHR322 package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose, engine connection cable for the generator
CSR322 complete Elite package: 15 m internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator
CHR322 complete Elite package: 2 × 30 m (60 m) internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator

Power supply, generator and compressor

Total system power: 15 kW. Full-load current: 65 A at 230 V (single-phase) or 24 A at 400 V (three-phase).

Generator: Graco’s rule is (sum of the power of all consumers) × 1.25 = required generator power in kW. For this Reactor alone that is at least 19 kW; with a compressor and other equipment on the same generator we recommend a three-phase (400 V) generator of 25–30 kW. The Power Management function (Pro and Elite) can limit the heater and reduce the generator size needed.

Compressor: the Fusion AP/PC gun needs 5.6–9 bar and uses 20–200 l/min of air for purging, depending on the mix chamber. With Core E1 electric pumps a compressor of about 400–600 l/min is sufficient (for the gun, dryer and breathing air). With T4 pneumatic pumps add 85–310 l/min per pump, so a compressor of about 700–800 l/min is needed. Graco recommends a compressor that runs continuously (load/unload) rather than one that constantly starts and stops, together with an air dryer.

Detailed guide with flow charts and recommendations by job size: Waterproofing and thermal insulation with modern materials – guide (in Serbian).

Gun and transfer pumps – chosen with the machine

The gun is chosen separately, according to the job: Fusion AP (air-purge gun), Fusion PC (ProConnect cartridge – rebuilt in seconds) or Fusion FX (the lightest in the Fusion series).

For feeding material from the drum, choose transfer pumps: Core E1 (electric, quiet, no air consumption – with the Elite version they activate Katalyst) or T4 (pneumatic, 3:1).

Guns, pumps, heated hoses and spare parts are in the section Equipment and parts for material spraying and waterproofing:

Available versions (Graco Part No.)

  • 26R320 – Standard Tier, 10 kW
  • 26R321 – Pro Tier, 10 kW
  • 26R322 – Elite Tier, 10 kW

Please quote the part number of the version you need.

Feature Specification
Manufacturer Graco (USA)
Model Reactor 3 E-XP1 (Standard / Pro / Elite)
Drive electric, brushless motor 1.8 HP
Purpose polyurea, plural-component coatings
Max. flow 5.7 l/min (1.5 gal/min)
Max. working pressure 207 bar (3000 psi)
Primary heater 10 kW
Max. heated hose length 67 m
Power supply 230 V (single-phase) or 400 V (three-phase), 50/60 Hz
Total system power 15 kW
Weight about 118 kg

Have a question or need more information? Contact us – our team is here to help.