Graco Reactor 3 E-XP2 – electric polyurea machine
- About the product
- Description
- Technical specifications
Graco Reactor 3 E-XP2 – electric polyurea machine
Graco Reactor 3 E-XP2 is an electric machine for hot spraying of polyurea and plural-component coatings. Successor to the Reactor 2 E-XP2.
Typical jobs: medium and large jobs – flat roofs, car parks, industrial floors, tanks, truck bed liners.
Key features
- 2.5 HP brushless motor, output up to 7.6 l/min (2 gal/min)
- Pressure up to 241 bar (3,500 psi)
- 15 kW heater (dual block), independent heating of A and B hoses
- Heated hoses up to 97 m
- Reactor Connect: monitoring of operation, consumption and location by phone (Pro and Elite)
Standard, Pro or Elite?
- Standard – touchscreen display (ADM), independent heating of A and B hoses, data download via USB.
- Pro – everything in Standard + more powerful heaters, large inlet filters, Reactor Connect (monitoring and control by phone), automatic pressure balancing and heater power management.
- Elite – everything in Pro + Katalyst control of the whole system from drum to gun, mix ratio monitoring (Ratio Assurance), inlet pressure and temperature sensors. With Core E1 pumps it automatically shuts off the supply when material runs out.
Standard and Pro can later be upgraded to Elite level.
Machine and package part numbers
The whip is a short flexible hose between the heated hose and the gun. The gun is ordered separately.
| Part no. | Contents |
|---|---|
| Standard | |
| 26R340 | E-XP2 Standard machine, 15 kW heater |
| ESR340 | package: 15 m externally heated hose + 3 m whip hose |
| EHR340 | package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose |
| ISR340 | package: 15 m internally heated hose + 6 m whip hose |
| IHR340 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose |
| Pro | |
| 26R341 | E-XP2 Pro machine, 15 kW heater |
| ESR341 | package: 15 m externally heated hose + 3 m whip hose |
| EHR341 | package: 4 × 15 m (60 m) externally heated hose + 3 m whip hose |
| ISR341 | package: 15 m internally heated hose + 6 m whip hose |
| IHR341 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose |
| Elite | |
| 26R342 | E-XP2 Elite machine, 15 kW heater |
| ESR342 | package: 15 m externally heated hose + 6 m whip hose, engine connection cable for the generator |
| EHR342 | package: 4 × 15 m (60 m) externally heated hose + 6 m whip hose, engine connection cable for the generator |
| ISR342 | package: 15 m internally heated hose + 6 m whip hose, engine connection cable for the generator |
| IHR342 | package: 2 × 30 m (60 m) internally heated hose + 6 m whip hose, engine connection cable for the generator |
| CSR342 | complete Elite package: 15 m internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator |
| CHR342 | complete Elite package: 2 × 30 m (60 m) internally heated hose + 6 m whip + Core E1 transfer pumps, engine connection cable for the generator |
The complete CHR342 package is also available as a separate product.
Power supply, generator and compressor
Total system power: 22.3 kW. Full-load current: 97 A at 230 V (single-phase) or 35 A at 400 V (three-phase).
Generator: Graco’s rule is (sum of the power of all consumers) × 1.25 = required generator power in kW. For this Reactor alone that is at least 28 kW; with a compressor and other equipment on the same generator we recommend a three-phase (400 V) generator of 35–40 kW. The Power Management function (Pro and Elite) can limit the heater and reduce the generator size needed.
Compressor: the Fusion AP/PC gun needs 5.6–9 bar and uses 20–200 l/min of air for purging, depending on the mix chamber. With Core E1 electric pumps a compressor of about 400–600 l/min is sufficient (for the gun, dryer and breathing air). With T4 pneumatic pumps add 85–310 l/min per pump, so a compressor of about 1,000 l/min is needed. Graco recommends a compressor that runs continuously (load/unload) rather than one that constantly starts and stops, together with an air dryer.
Detailed guide with flow charts and recommendations by job size: Waterproofing and thermal insulation with modern materials – guide (in Serbian).
Gun and transfer pumps – chosen with the machine
The gun is chosen separately, according to the job: Fusion AP (air-purge gun), Fusion PC (ProConnect cartridge – rebuilt in seconds) or Fusion FX (the lightest in the Fusion series).
For feeding material from the drum, choose transfer pumps: Core E1 (electric, quiet, no air consumption – with the Elite version they activate Katalyst) or T4 (pneumatic, 3:1).
Guns, pumps, heated hoses and spare parts are in the section Equipment and parts for material spraying and waterproofing:
Available versions (Graco Part No.)
- 26R340 – Standard Tier, 15 kW
- 26R341 – Pro Tier, 15 kW
- 26R342 – Elite Tier, 15 kW
Please quote the part number of the version you need.
| Feature | Specification |
|---|---|
| Manufacturer | Graco (USA) |
| Model | Reactor 3 E-XP2 (Standard / Pro / Elite) |
| Drive | electric, brushless motor 2.5 HP |
| Purpose | polyurea, plural-component coatings |
| Max. flow | 7.6 l/min (2 gal/min) |
| Max. working pressure | 241 bar (3500 psi) |
| Primary heater | 15 kW (dual block) |
| Max. material temperature | 88 °C |
| Max. heated hose length | 97 m |
| Power supply | 230 V (single-phase) or 400 V (three-phase), 50/60 Hz |
| Total system power | 22,3 kW |
| Weight | about 143 kg |
CONTACT US
Have a question or need more information? Contact us – our team is here to help.
SALES
RELATED PRODUCTS
-
Graco Mark HP XT – sprayer for roof coatings
-
Graco Mark HP XT Standard – high-pressure electric airless sprayer, Big 150 (18H416)
-
Graco Mark X HD 3-in-1 – electric airless sprayer, 230–240 V
-
Category: Graco Mark XT sprayers, Painting machines, Waterproofing machines, Liquid membrane machines, Universal machines
Graco Mark XV XT HD 3-in-1 Standard electric airless sprayer, Hi-Boy (18H403)




