Graco Reactor 3 H-XP3 – hydraulic polyurea machine
- About the product
- Description
- Technical specifications
Graco Reactor 3 H-XP3 – hydraulic polyurea machine
Graco Reactor 3 H-XP3 is the largest hydraulic polyurea machine in the Reactor 3 generation, for the largest projects and the largest mix chambers.
Typical jobs: the largest jobs – bridges, large flat roofs, tanks and channels, industrial facilities.
Key features
- 7.5 HP hydraulic drive, output up to 11.4 l/min (3 gal/min)
- Pressure up to 241 bar, 80 cm³ pumps
- 20 kW heater (dual block)
- Heated hoses up to 128 m
- Elite: electronic pressure control, inlet sensors, Katalyst
Standard, Pro or Elite?
- Standard – touchscreen display (ADM), independent heating of A and B hoses, data download via USB.
- Pro – everything in Standard + more powerful heaters, large inlet filters, Reactor Connect (monitoring and control by phone), automatic pressure balancing and heater power management.
- Elite – everything in Pro + Katalyst control of the whole system from drum to gun, mix ratio monitoring (Ratio Assurance), inlet pressure and temperature sensors. With Core E1 pumps it automatically shuts off the supply when material runs out.
Standard and Pro can later be upgraded to Elite level.
Machine and package part numbers
The whip is a short flexible hose between the heated hose and the gun. The gun is ordered separately.
| Part no. | Contents |
|---|---|
| Pro (400 V) | |
| 27R386 | H-XP3 Pro machine, 20 kW heater, 400 V |
| ESR386 | package: 15 m externally heated hose + 3 m whip hose |
| EHR386 | package: 6 × 15 m (90 m) externally heated hose + 3 m whip hose |
| ISR386 | package: 15 m internally heated hose + 6 m whip hose |
| IHR386 | package: 3 × 30 m (90 m) internally heated hose + 6 m whip hose |
| Elite (400 V) | |
| 27R388 | H-XP3 Elite machine, 20 kW heater, 400 V |
| ESR388 | package: 15 m externally heated hose + 6 m whip hose |
| EHR388 | package: 6 × 15 m (90 m) externally heated hose + 6 m whip hose |
| ISR388 | package: 15 m internally heated hose + 6 m whip hose |
| IHR388 | package: 3 × 30 m (90 m) internally heated hose + 6 m whip hose |
| CSR388 | complete Elite package: 15 m internally heated hose + 6 m whip + Core E1 transfer pumps |
| CHR388 | complete Elite package: 3 × 30 m (90 m) internally heated hose + 6 m whip + Core E1 transfer pumps |
| 27R402 | H-XP3 Elite machine, 20 kW, 400 V, variable mix ratio (pumps ordered separately) |
Versions for other supply voltages (27R385 Pro, 27R387 Elite, 27R401) are available on request.
Power supply, generator and compressor
Total system power: 31.7 kW. Full-load current: 52 A at 400 V (three-phase).
Generator: Graco’s rule is (sum of the power of all consumers) × 1.25 = required generator power in kW. For this Reactor alone that is at least 40 kW; with a compressor and other equipment on the same generator we recommend a three-phase (400 V) generator of 50–60 kW. The Power Management function (Pro and Elite) can limit the heater and reduce the generator size needed.
Compressor: the Fusion AP/PC gun needs 5.6–9 bar and uses 20–200 l/min of air for purging, depending on the mix chamber. With Core E1 electric pumps a compressor of about 400–600 l/min is sufficient (for the gun, dryer and breathing air). With T4 pneumatic pumps add 85–310 l/min per pump, so a compressor of about 1,200–1,500 l/min is needed. Graco recommends a compressor that runs continuously (load/unload) rather than one that constantly starts and stops, together with an air dryer.
Detailed guide with flow charts and recommendations by job size: Waterproofing and thermal insulation with modern materials – guide (in Serbian).
Gun and transfer pumps – chosen with the machine
The gun is chosen separately, according to the job: Fusion AP (air-purge gun), Fusion PC (ProConnect cartridge – rebuilt in seconds) or Fusion FX (the lightest in the Fusion series).
For feeding material from the drum, choose transfer pumps: Core E1 (electric, quiet, no air consumption – with the Elite version they activate Katalyst) or T4 (pneumatic, 3:1).
Guns, pumps, heated hoses and spare parts are in the section Equipment and parts for material spraying and waterproofing:
| Feature | Specification |
|---|---|
| Manufacturer | Graco (USA) |
| Model | Reactor 3 H-XP3 (Pro / Elite) |
| Drive | hydraulic, 7.5 HP |
| Purpose | polyurea, plural-component coatings |
| Max. flow | 11.4 l/min (3 gal/min) |
| Max. working pressure | 241 bar (3500 psi) |
| Pump displacement | 80 cm³ |
| Primary heater | 20 kW (dual block) |
| Max. heated hose length | 128 m |
| Power supply | 400 V (three-phase), 50/60 Hz |
| Total system power | 31,7 kW |
CONTACT US
Have a question or need more information? Contact us – our team is here to help.
SALES
RELATED PRODUCTS
-
Graco Mark HP XT – sprayer for roof coatings
-
Graco Mark HP XT Standard – high-pressure electric airless sprayer, Big 150 (18H416)
-
Graco Mark X HD 3-in-1 – electric airless sprayer, 230–240 V
-
Category: Graco Mark XT sprayers, Painting machines, Waterproofing machines, Liquid membrane machines, Universal machines
Graco Mark XV XT HD 3-in-1 Standard electric airless sprayer, Hi-Boy (18H403)




