EcoQuip 2 EQp

Vapour Abrasive Blast Equipment

Category:

Priprema površine može zahtevati dosta vremena, posebno ako uklanjate slojeve boje ili premaze koji su dugo naneti pre dosta vremena. Brušenje, struganje, korišćenje hemikalija (termohemijsko uklanjanje) otežavaju posao, jer isti lepak koji spaja boju takođe otežava uklanjanje.

Iako je razvijeno mnogo različitih alata i tehnologija za površinsko čišćenje i pripremu, postupci mokrog i suvog abrazivnog peskaranja postali su najčešće i široko korišćene metode. Nisu sve metode peskarenja iste i na kraju, radi se o pronalaženju najboljeg rešenja za brži posao i sa što manje prašine, vode i medija.

Predstavljamo novo, prenosivo i moćno rešenje prilikom peskarenja površina

Graco nova mašina, EcoQuip2 Eqp nije samo jednostavan za upotrebu, već je i dovoljno lagan pa se može prebaciti sa jednog posla na drugi. Pored toga, smanjuje prašinu i do 92% za razliku od tradicionalnog suvog peskarenja. Mašina koristi vrlo malo vode, čineći zadržavanje i čišćenje otpada jednostavnim i manje neurednim za razliku od drugih tehnologija suvih i vlažnih abrazivnih peskarenja.

Čišćenje, restauracija i uklanjanje

Bez obzira da li planirate da uklonite grafite, gumu, čađ ili lepak ili očistite i uklonite oštećenja od vatre ili dima, vreme je da razmotrite alterntivu za pranje pri naponu/pritisku, hemijsko čišćenje ili alate za ruke i čekinje. Graco EQp je prenosiva i moćna mašina  koja obavlja posao brzo i efikasno.

Upotreba:

  • Priprema čeličnih površina i betona
  • Uklanjanje grafita, gume, buđi i čađi
  • Uklanjane boje i mrlja
  • Čišćenje drveta, betona, čelika
  • Čišćenje od požara i dima
  • Čišćenje cigla
  • Priprema ograda od gvožđa
  • Uklanjanje kamenca i gipsanog maltera
  • Uklanjanje premaza od poliuretanske palube za jedrenje
  • Uklanjanje premaza s morske ploče i priprema površine

Manje prašine. Manje nereda.

Pre i Posle: drveni sto

Blast Cleaning Before and After - Wood Deck

 

Preparing a surface can be a challenging and time-consuming activity, especially if you are removing layers of paint or other coating products that have been there for a long time. Grinding, scraping, applying heat, and using chemicals (thermochemical stripping) are hard work because the same adhesive that cause paint to bond also make it hard to remove.

Although many different tools and technologies have been developed for surface cleaning and preparation, the wet and dry abrasive blasting processes have become the most common and widely used methods. But not all abrasive blasting methods are the same and in the end, it’s about finding the best solution to get the job done quickly and with as little dust, water and media as possible.

Introducing a new portable and powerful blasting solution in surface preparation

Graco’s new EcoQuip2 Eqp is not only easy to use, but portable enough to take from one job to another. In addition, this affordable option in vapour abrasive blast equipment reduces dust by up to 92% less than traditional dry blasting. The machine uses very little water, making containment and cleanup of debris simple and less messy than power/pressure washers or other dry and wet abrasive blasting technologies.

Cleaning, restoration and removal

Whether you plan to remove graffiti, gum, mold, soot or glue, or clean and remove damage from fire or smoke, it’s time to consider an alternative to your power/pressure washer, chemical cleaners or hand/bristle tools. Graco’s EQp is a portable and powerful machine that gets the job done quickly and effectively.

Applications:

  • Steel and concrete surface preparation
  • Graffiti, gum, mold & soot removal
  • Paint & stain removal
  • Wood, concrete, steel cleaning
  • Fire and smoke damage cleaning
  • Brick and patio cleaning
  • Iron fence and railing preparation
  • Limestone, marble and stucco stain removal
  • Polyurethane deck coating removal for yachting
  • Marine on-board coating removal and surface preparation

Less dust. Less containment & tenting.

Before and After: Wood Deck

Blast Cleaning Before and After - Wood Deck

Prednosti EQp:

  • Prenosiva kolica sa ručicama za dizanje – teška su samo 99,8 kg (220 lb)
  • Do 92% manje prašine od tradicionalnog suvog peskarenja
  • Mala potrošnja vode, manje nereda – koristi samo 1/2 do 1 kt./min. vode
  • Radi sa grubim, finim ili nerazornim medijumom
  • Brze stope uklanjanja u poređenju s drugim metodama čišćenja – Pritisak do 10 bara (150 psi)
  • Izduvava do 90 minuta između punjenja i drži približno (4) vreću od 25 kg medijuma
  • Manje restriktivni zahtevi za PPE
  • Smanjeni uticaj na životnu sredinu

 

Benefits of EQp:

  • Portable cart with lift handles – weighs only 99.8 kg (220 lb) empty
  • Up to 92% less dust than traditional dry blasting
  • Low water usage, less mess – Only uses 1/2 to 1 qt./min. of water
  • Works with coarse, fine or non-destructive media
  • Fast removal rates compared to other cleaning methods – Blast pressures up 10 bar (150 psi)
  • Blasts for up to 90 minutes between refills and holds approximately (4) 25 kg bags of media
  • Less restrictive PPE requirements
  • Reduced environmental impact

Leave a Reply

Ваша адреса е-поште неће бити објављена. Неопходна поља су означена *

EcoQuip 2 EQp

Vapour Abrasive Blast Equipment

EcoQuip 2 EQs Dual Line

Vapour Abrasive Blast Equipment

XForce HD

Heavy-Duty Cordless Airless Sprayer

G15 and G40 Air-Assisted Spray Guns

Maksimalna efikasnost i kvalitet

Finex Air Spray Gun

Lagan, ergonomski pištolj za raspršivanje

WB100 i WB3000

Za izolaciju premaza na vodenoj bazi

Finex Air Spray Package

Affordable Spray Package for High Quality Finishing

Merkur ES Spray Packages

Air-Assist and Airless Spray Packages

Dura-Flo and Xtreme Piston Pumps

Durable supply pumps with long-life packing design