Kontur 600


This machine is designed for horizontal airless road marking. A paint tank big enough for 1.200 m2 of markings and high maneuverability allows marking streets and municipal/federal highways. The width of 1.3 m allows using the machine without interfering with the city traffic.


Kontur 600 is designed for horizontal road marking using quick-drying paints and retroreflective glass beads.


The size of the machine allows applying markings on the roads in the city and outside the city without interfering with traffic. The hydraulic wheel drive ensures smooth running. The aiming device can be raised or lowered from the operator workplace to quickly bring the machine from the transport position to the operating position and back.

The airless marking technology, where paint pressure can reach 130 bar, allows using high-viscosity road marking materials (70 to 140 seconds measured with Ford # 4 cup) with high solids content. Such paints dry quickly and do not smear when applied in thick layers (up to 650 μm).

High-quality components ensure reliability and long service life of the equipment. In the machine we use components of leading companies like Perkins, Graco, Danfoss, Festo, Fini, and Kamber.


  • Central marking unit with three pairs of paint and glass bead guns (Kamber);
  • Right marking unit, without guns;
  • M12 marking control panel;
  • Foot pedal duplicating START button on the marking control panel;
  • Paint flow meter;
  • Handheld gun with 10 m hose;
  • Flashing lights on the roof;
  • Spotlight for the marking unit;
  • Operator workplace light;
  • Hydraulic drive for raising/lowering the central marking unit;
  • Hydraulic drive for raising/lowering the aiming device;

Basic Specifications

Parameter Kontur 600
Engine type Diesel
Engine power, kW 44.7
Engine power, hp 61
Engine manufacturer Perkins
Cylinders 4
Engine capacity, cm3 2,212
Maximum engine speed, rpm 3,000
Approval EU Stage IНА

(TlER 2)

Generator, A 90
Compressor Piston
Compressor capacity (inlet), L/min 556
Maximum operating road gradient, % 20
Maximum gradeability, % 30
Driving speed, km/h 12
Glass bead tank, L 2×55
Glass bead tank, kg 170
Control panel M12
Display type Color, TFT 480×640
Display image size, inches 5.7
Preset programs Up to 24
Quick program selection buttons 8
Control panel modes (automatic/semi-automatic/manual) Available
Marking material (main/optional) Paint/

Spray plastic 100:2

Maximum marking speed, km/h

(with main/optional material)

Maximum marking material amount, kg 600
Maximum hardener volume, L 30
Fuel tank capacity, L 40
Oil tank capacity, L 75
Main material tank capacity, L 375
Guns (applicators) 3
Double line width, mm Up to 150
Single line width, mm Up to 300
Overall dimensions (LxWxH), mm:
– Working position 5,200×2,000×2,100
– Transport position 3,400×1,300×2,100
Unladen weight, kg 1,700
Total weight, kg 2,600

Leave a Reply

Ваша адреса е-поште неће бити објављена. Неопходна поља су означена *