ProMix 3KS Proportioners

Electronic Plural Component Proportioning Systems

  • Ručna i automatska konfiguracija
  • Jedna ili više boja i katalizatori
  • Vrhunski kvalitet završne obrade
  • Jednostavno programiranje omogućava brzo podešavanje i efikasnu kontrolu procesa
  • Napredni web interface omogućava upravljanje sistemom

 

  • Manual and automatic configurations
  • Intrinsically safe fluid panels easily integrate into hazardous areas
  • Single- or multi-color and catalysts
  • Accurate ratio assurance for superior finish quality
  • Simple programming allows fast set up and efficient process control
  • Advanced web interface provides consolidated system management and reporting
ProMix 3KS Manual System
Maksimalni vazdušni radni pritisak
100 psi
Dovod vazduha
75–100 psi
Veličina ulaznog filtera
3/8 npt(f)
Filtracija vazduha (isporučuje Graco)
5 micron (minimum) potrebna filtracija; čist i suv vazduh
Filtracija vazduha za  raspršivanje vazduha (isporučuje korisnik)
30 micron (minimum)  potrebna filtracija; čist i suv vazduh
Opseg mešanja
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
Odnos tečnosti
do +/- 1%
Rukovanje sa tečnošću
jedna ili dve komponente: rastvarač i vodene boje, poliuretani, epokies, lakirane kiseline, izocijanati osjetljivi na vlagu
Opseg viskoznosti tečnosti
20–5000 cps
Filtracija tečnosti (isporučuje korisnik)
100 mesh minimum
Zahtevi za spoljno napajanje
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Opseg radne temperature
41–122°F
Procenjivanje uslova životne sredine
unutrašnja upotreba, stepen zagađenja (2), kategorija instalacije II
Delovi obloženi sa
303 i 304 nerđajući čelik, karbid (sa niklovanim vezivom), perfluoroelastomer, PTFE
Maksimalni radni pritisak tečnosti
Osnovni sistem
3000 psi
Niži pritisak promene boje
300 psi
Viši pritisak promene boje
3000 psi
Coriolis Meter
2300 psi
Opseg protoka tečnosti
G3000, G250 Meter
0.02–1.00 gpm
G3000HR, G250HR Meter
0.01–0.50 gpm
Coriolis Meter
0.005–1.00 gpm
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
Fluid Porting
Ulazni merač protoka tečnosti
1/4 npt(f)
Ulazni adapetr tiple za doziranje/boje
1/4 npt(f)
3KS Fluid Station
1/4 npt(m)
Fluid Outlet Size (static mixer)
1/4 npt(f)
Nivo buke
Nivo zvučnog pritiska
ispod 70 dBA
Nivo zvučne snage
ispod 85 dBA

 

ProMix 3KS Automatic System
Maximum working air pressure
100 psi
Air supply
75–100 psi
Air filter inlet size
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
On-ratio accuracy
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
Environmental conditions rating
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
3000 psi
Low pressure color change
300 psi
High pressure color change
3000 psi
Coriolis Meter
2300 psi
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
G3000HR, G250HR Meter
0.01–0.50 gpm
Coriolis Meter
0.005–1.00 gpm
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
3KS Fluid Station
1/4 npt(m)
Fluid Outlet Size (static mixer)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
Sound power level
below 85 dBA
ProMix 3KS Manual System
Maximum working air pressure
100 psi
Air supply
75–100 psi
Air filter inlet size
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
On-ratio accuracy
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
Environmental conditions rating
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
3000 psi
Low pressure color change
300 psi
High pressure color change
3000 psi
Coriolis Meter
2300 psi
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
G3000HR, G250HR Meter
0.01–0.50 gpm
Coriolis Meter
0.005–1.00 gpm
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
3KS Fluid Station
1/4 npt(m)
Fluid Outlet Size (static mixer)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
Sound power level
below 85 dBA

 

ProMix 3KS Automatic System
Maximum working air pressure
100 psi
Air supply
75–100 psi
Air filter inlet size
3/8 npt(f)
Air filtration for air logic and purge air (Graco-supplied)
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied)
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range
Stage 1 (A:B): 0.1:1–50:1, Stage 2 (A+B:C): 0.1:1–50:1
On-ratio accuracy
up to +/- 1%, user selectable
Fluids handled
one or two component: solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid
20–5000 cps
Fluid filtration (user-supplied)
100 mesh minimum
External power supply requirements
85–250 Vac, 50/60 Hz, 2 amps maximum draw, 15 amp maximum circuit breaker required, 8 to 14 AWG power supply wire gauge
Operating temperature range
41–122°F
Environmental conditions rating
indoor use, pollution degree (2), installation category II
Wetted parts
303 and 304 stainless steel, Tungsten carbide (with nickel binder), perfluoroelastomer, PTFE
Maximum fluid working pressure
Base system
3000 psi
Low pressure color change
300 psi
High pressure color change
3000 psi
Coriolis Meter
2300 psi
Fluid Flow Rate Range
G3000, G250 Meter
0.02–1.00 gpm
G3000HR, G250HR Meter
0.01–0.50 gpm
Coriolis Meter
0.005–1.00 gpm
S3000 Solvent Meter (accessory)
0.01–0.50 gpm
Fluid Porting
Flow Meter Fluid Inlet
1/4 npt(f)
Dose Valve/Color Valve Adapter Inlets
1/4 npt(f)
3KS Fluid Station
1/4 npt(m)
Fluid Outlet Size (static mixer)
1/4 npt(f)
Noise Level
Sound pressure level
below 70 dBA
Sound power level
below 85 dBA

Leave a Reply

Ваша адреса е-поште неће бити објављена. Неопходна поља су означена *