ProMix PD2K Proportioners

  • Do 80% redukovano ispiranje otpada
  • Ograničeno mešanje materijala u sistemu
  • Brža promena boje i manje materijala za ispiranje, što znači manje otpada i manje zastoja
  • Zaustavlja se pod pritiskom
  • Jednak odnos epoksida i uretana u jednom sisitemu
  • Koristite do 30 boja i 4 katalizatora sa 2 ili 3 pumpe za doziranje
  • Terensko servisiranje za manje od 20 minuta – nem apotrebe za skupim fabričkim popravkama, kao što je začepljenost pumpe
  • Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
  • Limited mixed material in the system – great for short pot life materials
  • Faster color changes and less material to flush mean less waste and less downtime
  • Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
  • Proportion both epoxy and urethane with ONE system
  • Manage up to 30 colors and 4 catalysts with 2 or 4 dosing pumps
  • Field serviceable in less than 20 minutes – no need for costly factory rebuilds like gear pumps
ProMix PD2K Electronic Proportioner
Maksimalni radni pritisak tečnosti
Sistem sa niskim pritiskom pumpe
300 psi
Sistem sa visokim pritiskom pumpe
1500 psi
Air Spray Systems
300 psi
Air-Assisted Spray Systems
1500 psi
Maksimlani radni pritisak vazduha:
100 psi
Dovod vazduha:
85–100 psi
Veličina ulaznog filtera:
3/8 npt(f)
Filtracija vazduha (isporučuje korisnik):
5 micron (minimum) potrebna filtracija; očistiti i osušiti
Filtracija vazduha za raspršivanje (isporučuje korisnik):
30 micron (minimum)  potrebna filtracija; očistiti i osušiti
Opseg mešanja:
0.1:1 — 50:1, ±1%
Rukovanje tečnošću:
jedan ili dvokomponetni rastvarač i vodene boje, poliuretani, epokies, lakirane kiseline, izocijanati osjetljivi na vlagu
Opseg viskoznosti tečnosti:
20–5000 centipoise
Filtracija tečnosti (isporučuje korisnik):
100 mesh minimum
Maksimalni protok tečnosti:
800 cc/min (zavisi od viskoznosti materijala)
Veličina izlaza fluida:
1/4 npt(m)
Zahtevi za spoljno napajanje:
90 – 250 Vac, 50/60 Hz, 7 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Opseg radne temperature
36 to 122°F
Opseg temperature skladištenja:
–4 to 158°F
Težina (približno):
195 lb
Podaci o zvuku:
Less than 75 dB(A)
Delovi obloženi sa:
17–4PH, 303, 304 SST, karbid (sa niklovim vezivom), perfluoroelastomer; PTFE, PPS, UHMWPE
MC0500
Pumpe se prodaju odvojeno; Pogledajte uputstvo za izabranu pumpu za informacije o obložnim materijalima
MC1000 i MC2000
17–4PH, 303, 304 SST, karbid (sa niklovim vezivom), perfluoroelastomer; PTFE, PPS, UHMWPE
MC3000 i MC4000
316 SST, 17–4PH SST, PEEK, perfluoroelastomer; PTFE, PPS, UHMWPE

 

ProMix PD2K Electronic Proportioner
Maximum fluid working pressure:
Systems with Low-Pressure Pumps
300 psi
Systems with High-Pressure Pumps
1500 psi
Air Spray Systems
300 psi
Air-Assisted Spray Systems
1500 psi
Maximum working air pressure:
100 psi
Air supply:
85–100 psi
Air filter inlet size:
3/8 npt(f)
Air filtration for air logic (user-supplied):
5 micron (minimum) filtration required; clean and dry air
Air filtration for atomizing air (user-supplied):
30 micron (minimum) filtration required; clean and dry air
Mixing ratio range:
0.1:1 — 50:1, ±1%
Fluids handled:
one or two component solvent and waterborne paints, polyurethanes, epoxies, acid catalyzed varnishes, moisture sensitive isocyanates
Viscosity range of fluid:
20–5000 centipoise
Fluid filtration (user-supplied):
100 mesh minimum
Maximum fluid flow:
800 cc/minute (depending on material viscosity)
Fluid outlet size:
1/4 npt(m)
External power supply requirements:
90 – 250 Vac, 50/60 Hz, 7 amps maximum draw. 15 amp maximum circuit breaker required. 8 to 14 AWG power supply wire gauge
Operating temperature range
36 to 122°F
Storage temperature range:
–4 to 158°F
Weight (approximate):
195 lb
Sound data:
Less than 75 dB(A)
Wetted parts:
17–4PH, 303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE, PPS, UHMWPE
MC0500
Pumps sold separately; see selected pump manual for wetted parts information.
MC1000 and MC2000
17–4PH, 303, 304 SST, Tungsten carbide (with nickel binder), perfluoroelastomer; PTFE, PPS, UHMWPE
MC3000 and MC4000
316 SST, 17–4PH SST, PEEK, perfluoroelastomer; PTFE, PPS, UHMWPE

Leave a Reply

Ваша адреса е-поште неће бити објављена. Неопходна поља су означена *