WB100 i WB3000

Za izolaciju premaza na vodenoj bazi

Graco WB100 i WB3000 služi za izolacij premaza na vodenoj bazi prilikom raspršivanjaelektrostatičkom opremom. Idealan za raspršivanje u kabinama.

The Graco WB100 and WB3000  is the dependable way to isolate waterborne coatings when spraying with electrostatic equipment. Ideal for spray booth systems.

  • Idealan za raspršivanje materijala na vodenoj bazi pod nižim pritiskom sa Pro Xp60 WB pištoljom, za vrhunski kvalitet završne obrade
  • Triton 1:1 150 Series pumpa omogućava ujednačen obrazac raspršivanja i istu debljinu premaza
  • Standradni ekran omogućava jednostavno praćenje napona prilikom rada
  • Kanta kapaciteta 19 L se lako menja
  • Pametni kontrolni sistem elektrostatičkog pištolja omogućava analizu perfomanski, prilagođavanje napona i lako rešavanje problema
  • Prenosni ormarić povećava pokretljivost i omogućava širok raspon primena

 

  • Ideal for low pressure waterborne material spraying with the Pro Xp60 WB gun for a superior finish quality and operator comfort
  • Triton 1:1 150 Series pump delivers a consistent spray pattern and uniform film thickness
  • Standard voltage display allows for easy monitoring of voltage for overall performance
  • Simple 5 gallon (19 l) pail design is easy to color change and flush the system
  • Electrostatic gun Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Portable cabinet increases mobility for a wide variety of applications

Specification

WB100 Waterborne Isolation Stand
Maximum Working Fluid Pressure
100 psi
Maximum Working Air Pressure
100 psi
Minimum Air Pressure at Gun Inlet
40 psi
Maximum Fluid Operating Temperature
120°F
Paint Resistivity Range
3 megohm-cm to infinity
Short Circuit Current Output
125 microamperes
Gun Air Inlet Fitting, left hand thread
1/4 npsm(m)
Gun Fluid Inlet Fitting
custom inlet for Graco waterborne fluid hose
Gun Weight
27.8 oz
Gun Length
11.1 in
Isolation Enclosure Air Inlet Fitting
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in OD tube
Isolation Enclosure Weight
125 lb
Isolation Enclosure Height
44 in
Isolation Enclosure Width
24 in
Isolation Enclosure Depth
29 in
Voltage Output Energy
With fluid hose 246431 installed
0.35 J
Models 244581, 245301
60 kV
Models 244582, 245305
30–60 kV
Noise Data
Sound power at 40 psi (0.28 MPa, 2.8 bar)
90.4 dB(A)
Sound power at 100 psi (0.7 MPa, 7 bar)
105.4 dB(A)
Sound pressure at 40 psi (0.28 MPa, 2.8 bar)
87 dB(A)
Sound pressure at 100 psi (0.7 MPa, 7 bar)
99 dB(A)
Wetted Parts
Gun
Stainless Steel, Nylon, Acetal, Ultra High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Wire, Polyethylene
Waterborne Fluid Hose
PTFE
Suction Tube
Polyethylene, Stainless Steel
Triton Pump
See Triton Pump manual.
  • Idealan za raspršivanje materijala na vodenoj bazi pod visokim pritiskom sa Pro Xp60 AA WB pištoljom, za vrhunski kvalitet završne obrade
  • Merkur ES 30:1 pumpa je jedna od najefikasnijih raspršivača dizajniran za upotrebu manje materijala i redukovanu potrošnju vazduha
  • Standradni ekran omogućava jednostavno praćenje napona prilikom rada
  • Kanta kapaciteta 19 L se lako menja
  • Pametni kontrolni sistem elektrostatičkog pištolja omogućava analizu perfomanski, prilagođavanje napona i lako rešavanje problema
  • Prenosni ormarić povećava pokretljivost i omogućava širok raspon primena

 

  • Ideal for high pressure waterborne material spraying with the Pro Xp60 AA WB gun for a superior finish quality and operator comfort
  • Merkur ES 30:1 pump is one of the most efficient sprayers designed to use less material and reduce air usage and pulsation
  • Standard voltage display allows for easy monitoring of voltage for overall performance
  • Simple 5 gallon (19 l) pail design is easy to color change and flush the system
  • Electrostatic gun Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
  • Portable cabinet increases mobility for a wide variety of applications

Specification

WB3000 Isolation System and Pro Xp 60 AA WB Gun
Maximum Working Fluid Pressure
3000 psi
Maximum Working Air Pressure
100 psi
Minimum Air Pressure at Gun Inlet
45 psi
Maximum Fluid Operating Temperature
120°F
Short Circuit Current Output
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M508 installed. H60T18: 60 kV. H60M18: 30–60 kV
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A), at 100 psi: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87.0 dB(A), at 100 psi: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
Isolation Enclosure Fluid Inlet Fitting
3/8 in. OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Merkur Pump: See manual 3A0732.

Leave a Reply

Ваша адреса е-поште неће бити објављена. Неопходна поља су означена *